In structural renovations; different parts are treated or handled according to the original plan, materials used and the part or area of the building in question. The lean manufacturing consultant Bay Area would also put to consider the use of the building before drawing up the cost. Working on residential and commercial or industrial buildings is different. Mainly because the laws governing the different constructions are not the same.
Foundation bolting is one of the common techniques used, it is literally fastening the house securely to its foundation by use of bolts. Large metal bolts are screwed onto the wood lying parallel to the concrete foundation. The bolts are separated by the correct measurements apart from each other for optimum tightness.
Because houses and many shelter designs are originally made differently, from the material, size, and design. Timber, stone concrete, brick, and mortar are some of the common buildings. What is of most consideration is the foundation of the house; any structure is as strong as its foundation after all. This is where the retrofitters would start, apart from the given information on when or which company or building style was used, a physical survey would be done intensively.
Any previous damage to the house would also be considered in the cost calculation. It could be due to a previous earthquake, bad construction work or the age of the structure. Whether the damaged was repaired or any such attempt made would also be considered. It is advisable to open up to constructors about anything at all however small about the structural history, this would save both time and money trying to figure out how to handle challenges.
After an unplanned, non-avoidable catastrophe much is lost, life, livelihood, and basic shelter. After earthquake disasters which left so much desperation in the hearts of many, the need to reconsider the safety of living spaces open people s eyes to amending it. Thus, the birth of retrofitting all structures began and the success of results made it a basic necessity rather than just fancy luxury.
Most residential homes were built with a cripple wall. This the sidewalls built to connect the house to the foundation, causing a gap in-between. This space can be a few inches to a couple of feet, it is the main cause of structural collapse in an earthquake. There is no doing away with this wall, the only logical action is to strengthen it with strong materials to take it away from being so vulnerable.
The companies come highly recommended and reviewed with actual tested and approved projects. When preparing for an earthquake hit, the best place to start is the retrofitting of the structure. While other damage maybe was done in a different area of a city, it is easier to start off and continue life while homes are still intact and live saved.
Many historical buildings eventually give in to age and collapse. Retrofitting can be safely done to save such heritage regardless it is a practical move. Older the house weaker becomes its foundation and walls. It is an attainable end to strengthen such a structure and add even more years to its existence. Even more, care is needed to handle fragile structures, it takes a lot of time to the first repair, replace before retrofitting and securing the whole structure.
Foundation bolting is one of the common techniques used, it is literally fastening the house securely to its foundation by use of bolts. Large metal bolts are screwed onto the wood lying parallel to the concrete foundation. The bolts are separated by the correct measurements apart from each other for optimum tightness.
Because houses and many shelter designs are originally made differently, from the material, size, and design. Timber, stone concrete, brick, and mortar are some of the common buildings. What is of most consideration is the foundation of the house; any structure is as strong as its foundation after all. This is where the retrofitters would start, apart from the given information on when or which company or building style was used, a physical survey would be done intensively.
Any previous damage to the house would also be considered in the cost calculation. It could be due to a previous earthquake, bad construction work or the age of the structure. Whether the damaged was repaired or any such attempt made would also be considered. It is advisable to open up to constructors about anything at all however small about the structural history, this would save both time and money trying to figure out how to handle challenges.
After an unplanned, non-avoidable catastrophe much is lost, life, livelihood, and basic shelter. After earthquake disasters which left so much desperation in the hearts of many, the need to reconsider the safety of living spaces open people s eyes to amending it. Thus, the birth of retrofitting all structures began and the success of results made it a basic necessity rather than just fancy luxury.
Most residential homes were built with a cripple wall. This the sidewalls built to connect the house to the foundation, causing a gap in-between. This space can be a few inches to a couple of feet, it is the main cause of structural collapse in an earthquake. There is no doing away with this wall, the only logical action is to strengthen it with strong materials to take it away from being so vulnerable.
The companies come highly recommended and reviewed with actual tested and approved projects. When preparing for an earthquake hit, the best place to start is the retrofitting of the structure. While other damage maybe was done in a different area of a city, it is easier to start off and continue life while homes are still intact and live saved.
Many historical buildings eventually give in to age and collapse. Retrofitting can be safely done to save such heritage regardless it is a practical move. Older the house weaker becomes its foundation and walls. It is an attainable end to strengthen such a structure and add even more years to its existence. Even more, care is needed to handle fragile structures, it takes a lot of time to the first repair, replace before retrofitting and securing the whole structure.
About the Author:
When you are looking for information about a lean manufacturing consultant Bay Area residents can come to our web pages online today. More details are available at http://www.ascendconsultingservice.com now.
Aucun commentaire:
Enregistrer un commentaire